Rear Wheel Type

Single Rear Wheel Double Rear Wheel

Package Option

Floor Wall Ceiling Door Panels Full Set

Menge verringern Menge erhöhen

In den Warenkorb legen

 

 

# Full-Scale Paper Templates for Mercedes-Benz Sprinter 170 (2019+) – Floor, Wall, Ceiling & Door Panels

Build your Sprinter interior the traditional DIY way — measure, trace, cut, and fit.

These are **full-scale (1:1) physical paper templates** designed to help DIY builders transfer Sprinter interior panel shapes directly onto plywood. The templates are pre-printed and shipped ready to use, so you don't need a CNC machine, CAD software, or a large-format printer.

Developed through real-world Sprinter conversion work, these templates provide a practical starting point for cutting your own floor, wall, ceiling, and door panels.

**Choose the panel package that matches your project: Floor, Wall, Ceiling, Door Panels, or Full Set.**

Before cutting any plywood, test-fit the templates inside your van and verify the alignment with your actual interior.

## PURCHASE OPTIONS

Select the package you need from the dropdown menu. Each option includes a different set of physical paper templates.

**1. Floor 

Includes full-scale paper templates for the Sprinter 170 floor panels. 

Floor varies depending on the rear wheel type of single rear wheel or double rear wheel.

**2. Wall 

Includes full-scale paper templates for the Sprinter 170 wall panels.

Use them to transfer the wall panel outlines onto plywood and adjust the shapes to accommodate your insulation, framing, and interior layout.

**3. Ceiling

Includes full-scale paper templates for the Sprinter 170 ceiling panels.

Designed to help you trace the ceiling panel shapes onto plywood before cutting and installation.

**4. Door Panels

Includes full-scale paper templates for all four door panel sections:

* Upper sliding door panel

* Lower sliding door panel

* Upper tailgate (rear door) panel

These templates provide the starting outlines for fabricating your own plywood door panels.

**5. Full Set 

Includes all four template categories for a more complete Sprinter interior project:

* Floor 

* Wall panels

* Ceiling panels

* Door panels — upper and lower sliding door panels, plus upper  tailgate panels

This is the most comprehensive option for builders planning to fabricate multiple interior panel sections.

*Purchase note: Select the appropriate package before checkout. Only the templates included in your selected option will be shipped.*

## WHAT YOU WILL RECEIVE

* Physical, pre-printed paper templates at full scale (1:1)

* The panel templates included in your selected purchase option

* Templates folded and packaged for shipping

**This is a physical product only.** No DXF files, CAD files, digital downloads, or PDFs are included or emailed with your purchase.

The templates are folded for shipping. Flatten them before use; shipping creases do not change the printed cutting outlines.

## KEY FEATURES & BENEFITS

### FULL-SCALE 1:1 TEMPLATES

Skip the process of scaling drawings, printing tiled pages, and assembling dozens of letter- or A4-size sheets.

The templates are already printed at their intended cutting size, allowing you to transfer the outlines directly onto plywood.

### NO CNC MACHINE OR CAD SOFTWARE REQUIRED

You don't need Fusion 360, CAD experience, a CNC machine, or access to a large-format printer.

Use traditional DIY tools such as a jigsaw, router, drill, and sander to fabricate your panels.

### DESIGNED AROUND REAL SPRINTER GEOMETRY

The templates were developed through measurements, design work, and actual Sprinter conversion experience.

They account for major curves, corners, openings, and relevant factory features, providing a practical starting point for your own interior panels.

### MADE FOR REAL DIY BUILDS

Every van conversion is slightly different. Insulation thickness, sound deadening, flooring, framing, adhesives, L-track, factory tolerances, and previous modifications can affect the final fit.

These templates provide a starting shape that you can test, trim, and adapt to your particular build.

## HOW IT WORKS – 5 SIMPLE STEPS

**1. FLATTEN**

Unfold the templates and smooth them out before use.

**2. VERIFY**

Place the templates inside your van. Check the alignment against the actual floor, walls, ceiling, doors, factory features, and other relevant reference points.

**3. TRACE**

Position the templates on your plywood and hold them securely in place. Trace the cutting outlines with a pencil or marker.

**4. CUT**

Cut along the traced lines using a jigsaw or router.

**5. TEST-FIT & TRIM**

Place the cut panels in the van and check their fit before final installation. Minor trimming is normal and may be necessary for your specific conversion.

## COMPATIBILITY & IMPORTANT DETAILS

**Primary application:** Mercedes-Benz Sprinter 170-inch wheelbase, 2019+ models.

These templates are designed around the Sprinter 170 interior geometry. They are not intended for the Sprinter 144, Ford Transit, Ram ProMaster, or other vehicle models.

Left-hand-drive and right-hand-drive configurations may differ in certain interior details. Verify the templates against your particular vehicle before cutting.

### VERIFY BEFORE CUTTING

Please do not cut your plywood solely on the assumption that the templates will fit your van perfectly.

Always test-fit the templates and verify important reference points and clearances first, especially if your van has:

* Different insulation or sound-deadening thickness

* Added framing or modified factory panels

* Different flooring thickness

* L-track or other interior hardware

* Aftermarket modifications

* Different door or interior configurations

Minor trimming and adjustments may be required. The templates are intended to provide an accurate starting point, not a guarantee of a perfect fit without modification.

### B-PILLAR FLOOR AREA

The floor templates include a curved section designed around the factory B-pillar plastic trim behind the driver seat.

If your van does not have this trim, or you plan to remove it, you can modify the shape by replacing the curved section with straight lines as needed.

### OLDER SPRINTER MODELS

These templates are designed around the 2019+ Sprinter 170 configuration. Older models may have different interior geometry and should not be assumed to fit without modification.

### U.S. CUSTOMS NOTE

These physical paper templates ship from Canada. U.S. customs duties and import requirements may depend on the applicable rules at the time of import.

## WHO ARE THESE TEMPLATES FOR?

These templates are ideal for:

* DIY Sprinter builders without access to a CNC shop

* First-time van converters looking for a practical starting point

* Builders who prefer hands-on woodworking over CAD and CNC fabrication

* Sprinter owners who want to reduce layout mistakes and plywood waste

* Builders fabricating their own floor, wall, ceiling, or door panels

* Anyone who wants full-scale patterns without purchasing a large-format printer

## FREQUENTLY ASKED QUESTIONS

**Q: Are these digital files or physical templates?**

A: These are physical, pre-printed paper templates shipped to you by mail. No digital files are included.

**Q: Do I need a CNC machine?**

A: No. The templates are designed for traditional DIY fabrication using tools such as a jigsaw or router.

**Q: Do I need a large-format printer?**

A: No. The templates are already printed at full scale.

**Q: What is included in the Door Panels option?**

A: The Door Panels option includes four sections: the upper and lower sliding door panels, and the upper tailgate (rear door) panels.

**Q: Does the Full Set include all four categories?**

A: Yes. The Full Set includes Floor, Wall, Ceiling, and Door Panels, including all four door sections described above.

**Q: If I purchase only the Floor option, will I receive the wall, ceiling, and door templates too?**

A: No. Each purchase option includes only the corresponding panel category. Select Full Set if you want all four categories.

**Q: Should I check the templates against my van before cutting?**

A: Yes. Place the templates inside your actual van and verify alignment before cutting plywood. Insulation, flooring, framing, factory tolerances, and modifications can affect the final fit.

**Q: The templates arrived folded. Are the creases a problem?**

A: No. They are folded for shipping. Flatten them before use; the creases do not change the printed cutting outlines.

**Q: Will the finished panels fit perfectly without trimming?**

A: Not necessarily. Minor trimming is normal because individual builds and interior materials can differ. Test-fitting is an important part of the fabrication process.

**Q: Can I use these templates for a Sprinter 144?**

A: No. These templates are designed for the Sprinter 170 wheelbase, which has different interior dimensions from the 144.

**Q: Can I use these templates for a Ford Transit or Ram ProMaster?**

A: No. They are designed specifically around the Mercedes-Benz Sprinter 170 interior geometry.

**Q: Are DXF files or PDFs included with the purchase?**

A: No. This listing is for physical paper templates only. No DXF files, CAD files, PDFs, or digital downloads are included.

**Q: Can I cut the plywood immediately after receiving the templates?**

A: We strongly recommend flattening and test-fitting the templates in your van first. Verify the alignment and make any necessary adjustments before cutting your plywood.

---

**SprinterDIY.Pro — Simple. Fast. Accurate for Sprinter DIYers.**