Kitchen Cabinet for Camper Van CNC Cutting DXF Digital File
$135.00
Precio de oferta
$135.00
Precio habitual
Ir directamente a la información del producto
Kitchen Cabinet for Camper Van CNC Cutting DXF Digital File
$135.00
Precio de oferta
$135.00
Precio habitual
# Camper Van Kitchen Galley Cabinet – CNC DXF Files – Sprinter, Transit & Promaster
## DIGITAL DOWNLOAD ONLY — NO PHYSICAL PRODUCT WILL BE SHIPPED
Design and CNC-cut your own camper van kitchen galley using these **CNC-ready DXF cutting files**.
This is not a theoretical or untested design. The cabinet has been **CNC-cut, assembled, installed in a camper van, used, tested, and refined through actual hands-on building and installation**.
The design has been developed through real-world use to improve the panel layout, interlocking joints, cabinet construction, and hardware integration.
The files allow you to CNC-cut the individual cabinet panels yourself or have them manufactured by a local CNC cutting service.
**You will receive digital DXF files only.**
**No physical cabinet, plywood, hardware, sink, appliances, or water tanks are included.**
---
# Designed, Built & Tested in a Real Camper Van
This kitchen galley has been:
* CNC cut
* Fully assembled
* Installed in a camper van
* Used in a real-world camper conversion
* Tested and refined through actual installation and use
The goal is to provide a cabinet design that has already gone through the practical issues of **cutting, assembly, installation, and everyday use**, rather than simply providing an untested CAD drawing.
---
# Interlocking Plywood Construction
The kitchen galley uses an **interlocking plywood joint design**, allowing the individual panels to fit together into a solid cabinet structure.
After CNC cutting, the panels are assembled and the interlocking joints should be secured with **small nails or brad nails**.
The design is intended for DIY camper van builders who want to:
* Source their own plywood
* Use their own CNC machine or a local CNC service
* Avoid designing the cabinet from scratch
* Assemble the cabinet themselves
* Customize the final installation for their own van
---
# Hardware Used in the Design
The DXF files provide the plywood cutting geometry. The following hardware is used in the physical cabinet design:
### 1. Marine Latches
The cabinet doors are designed around **marine-style latches with approximately a 2" (51 mm) mounting hole**.
These latches provide a secure closure suitable for the movement and vibration commonly experienced in camper vans.
**Marine latches are not included with the digital DXF files.**
### 2. Frameless 90° Cabinet Hinges
The cabinet doors use **frameless 90° cabinet hinges**.
These hinges are integrated into the cabinet design to provide a clean, simple door installation.
**Cabinet hinges are not included with the digital DXF files.**
Hardware dimensions and installation requirements should be verified before purchasing hardware.
---
# What You Receive
You will receive **digital DXF cutting files** for the plywood cabinet panels.
The files include the designed geometry for:
* Cabinet panels
* Interlocking joints
* Countertop
* Sink opening
* Lower cabinet openings
* Door and hardware-related panel details
* Other panel details required to CNC-cut the cabinet
**No physical products will be shipped.**
---
# Recommended Material
The design is intended for:
**5/8" (15 mm) plywood**
The original cabinet uses pre-finished plywood with a natural wood finish on both sides.
Because the interlocking joints are designed around the intended material thickness, we strongly recommend using approximately **15 mm / 5/8" plywood**.
Please measure your actual plywood thickness before cutting.
Nominal plywood thickness can vary between manufacturers.
### Important
If you use substantially thinner or thicker material, the interlocking joints may not fit correctly.
---
# Finished Cabinet Dimensions
Approximate finished dimensions:
* **Length:** 46"
* **Width:** 18.85"
* **Height:** 35"
Please verify these dimensions against your available space before cutting.
This is a **standalone cabinet design**, not a van-specific interior template.
---
# Sink Opening
The countertop includes a:
**15" × 17" sink opening**
The sink itself is not included.
Please select your sink before cutting and compare the manufacturer's required cutout dimensions with the DXF design.
Different sinks can have different cutout requirements even when their overall dimensions are similar.
---
# Water Tank Storage
The front cabinet opening underneath the sink measures approximately:
**29.75" × 20"**
This compartment is primarily designed for portable fresh-water and grey-water tanks.
It can also be used for other storage if desired.
**Water tanks are not included.**
Please verify the actual dimensions of your selected tanks before cutting.
---
# Microwave / Refrigerator Storage
The second front cabinet opening measures approximately:
**29.75" × 23"**
This compartment can be used for a compact microwave, refrigerator, or other storage depending on your equipment dimensions.
**Microwave and refrigerator are not included.**
Please check the actual dimensions and required clearances of your appliance before cutting.
---
# CNC Requirements
These files are intended for use with a **CNC router or CNC cutting service**.
You are responsible for:
* CNC machine setup
* Tool selection
* Workholding
* Toolpath generation
* Feeds and speeds
* Cutting depth
* Material selection
* Material thickness verification
* Final assembly
* Van installation
### G-code is NOT included.
CNC machines and controllers use different toolpaths, post-processors, tooling, feeds, and speeds.
You will need to create the appropriate toolpaths for your own CNC machine and setup.
---
# Strongly Recommended Before Cutting
**Please make a test cut first.**
Before cutting the entire cabinet, we strongly recommend cutting a small section containing one or more interlocking joints using your actual plywood.
This allows you to verify:
* Actual plywood thickness
* Joint fit
* Tool diameter
* CNC accuracy
* Cutting parameters
A small test cut can help prevent problems before committing an entire sheet of plywood.
---
# What's Included
* Digital DXF CNC cutting files
* Interlocking cabinet panel geometry
* Countertop geometry
* Sink opening
* Lower cabinet openings
* Door and hardware-related panel geometry
* Cabinet panel details required for CNC cutting
# What's NOT Included
* Physical cabinet
* Plywood
* CNC cutting service
* CNC machine
* G-code
* Machine-specific toolpaths
* Sink
* Fresh-water tank
* Grey-water tank
* Microwave
* Refrigerator
* Marine latches
* Frameless 90° cabinet hinges
* Nails or brad nails
* Van-specific mounting hardware
---
# Important Digital Product Notice
**THIS IS A DIGITAL DOWNLOAD ONLY.**
No physical cabinet or plywood will be shipped.
You will receive the digital DXF files and are responsible for CNC cutting, material selection, hardware sourcing, assembly, and installation.
Because CNC machines, software, tooling, and materials vary, you are responsible for verifying the files and your CNC setup before cutting.
---
# Frequently Asked Questions
### Q: Is this a physical cabinet?
No. This listing is for **digital CNC DXF files only**.
No physical cabinet or plywood will be shipped.
### Q: Has this design actually been tested?
Yes.
The cabinet has been **CNC-cut, assembled, installed in a camper van, used, tested, and refined** through actual hands-on building and installation.
### Q: What file format do I receive?
You will receive **DXF files** designed for use with compatible CAD/CAM and CNC software.
### Q: Do I need a CNC machine?
You need access to a CNC router or CNC cutting service.
You can either cut the parts yourself or provide the DXF files to a local CNC shop.
### Q: Is G-code included?
No.
G-code is not included because CNC machines use different controllers, tooling, post-processors, feeds, speeds, and machine setups.
You will need to generate your own toolpaths.
### Q: What plywood thickness should I use?
The design is intended for approximately **5/8" / 15 mm plywood**.
We recommend measuring the actual thickness of your plywood before cutting.
### Q: Can I use 12 mm or 18 mm plywood?
The design is specifically intended around approximately 15 mm material.
Using a substantially different thickness will affect the interlocking joints and may require modification of the joint geometry.
### Q: What hardware does the design use?
The physical cabinet design uses:
* **Marine latches with approximately 2" (51 mm) mounting holes**
* **Frameless 90° cabinet hinges**
These hardware components are **not included** with the digital DXF files.
### Q: Are the marine latches included?
No.
The DXF files are digital files only. The marine latches need to be purchased separately.
The design uses marine-style latches with approximately a **2" / 51 mm mounting hole**.
### Q: Are the cabinet hinges included?
No.
The cabinet uses **frameless 90° cabinet hinges**, which need to be sourced separately.
### Q: Does the DXF include the sink opening?
Yes.
The countertop includes a **15" × 17" sink opening**.
However, please compare this with the actual cutout requirement of your selected sink before cutting.
### Q: Does the DXF include the refrigerator and microwave openings?
Yes.
The lower openings are approximately:
* **Water tank compartment:** 29.75" × 20"
* **Microwave/refrigerator compartment:** 29.75" × 23"
Please verify your actual equipment dimensions before cutting.
### Q: Will this fit my Sprinter, Transit, or Promaster?
The cabinet can be used in these vans and other RVs, but **fitment inside your specific van is your responsibility**.
The finished cabinet dimensions are approximately **46" × 18.85" × 35"**.
Please measure your available space before cutting.
### Q: Is this a van-specific cabinet template?
No.
This is a **standalone kitchen cabinet design**.
It is not a complete van interior template and does not account for the exact curves, walls, or floor geometry of a particular van.
### Q: Does the DXF include mounting holes for my van?
No.
Van wall construction and mounting locations vary.
The final mounting method should be determined according to your particular van and interior build.
### Q: Can I modify the DXF?
Yes.
The DXF can generally be edited using compatible CAD/CAM software.
However, modifications to the material thickness, joint geometry, or panel dimensions may affect the final fit and assembly.
### Q: Can a CNC shop cut the cabinet for me?
Yes.
You can provide the DXF files to a local CNC service.
Please confirm with the CNC shop that they can import DXF files and work with approximately 15 mm / 5/8" plywood.
### Q: Do I need CAD/CAM software?
You need compatible software capable of importing DXF geometry and generating CNC toolpaths.
The exact software depends on your CNC machine and controller.
### Q: Do I need to test-cut the joints?
**Yes, we strongly recommend it.**
Always test-cut at least one interlocking joint using your actual plywood before cutting the complete cabinet.
This is especially important because actual plywood thickness and CNC cutting accuracy can vary.
### Q: Are the sink, refrigerator, microwave, and water tanks included?
No.
This is a **digital file only**.
All physical components must be purchased separately.
### Q: Does the DXF include the cabinet hardware?
No.
The DXF provides the cutting geometry for the plywood panels. Hardware such as hinges, marine latches, mounting hardware, and nails are not included.
### Q: Can I use these files for my own camper van?
Yes. The files are intended for DIY use and for manufacturing the cabinet for your own project. Please refer to the license terms provided with the digital files for any commercial production or resale restrictions.
### Q: Will I receive anything in the mail?
No.
**This is a digital download.**
No physical product will be shipped.
---
# Before You Purchase
Please make sure you understand that this listing is for **DXF CNC cutting files, not a physical cabinet**.
Before cutting, we recommend confirming:
1. Your available cabinet space
2. Your actual plywood thickness
3. Your sink dimensions and required cutout
4. Your water tank dimensions
5. Your refrigerator or microwave dimensions
6. Your CNC machine and tooling
7. Your ability to generate appropriate CNC toolpaths
8. The hardware you intend to use
The design has already been **cut, assembled, installed, tested, and refined in a real camper van**. The DXF files are intended to give DIY builders a tested starting point while still allowing them to control their own material, CNC process, hardware, and final installation.